{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Cutting edge ⌀ DC | 20 mm | |
Number of cutting edges Z | 3 | |
Shank type | Weldon shank | |
Setting angle κ | 45 degrees | |
Milling application | Circular milling; Ramping | |
Through-coolant | yes | |
Tool exchange | PowerCard | |
maximum external ⌀ Dmax | 28.2 mm | |
Overhang L1 | 40 mm | |
Overall length Ltot | 90 mm | |
Shank ⌀ Ds h6 | 20 mm | |
suitable indexable insert | SD... 0903 | |
⌀ D3 | 28 mm | |
Circular interpolation milling ⌀ Dmin | 48 mm | |
Circular interpolation milling ⌀ Dmax | 54 mm | |
Circular interpolation milling ap | 1.5 mm | |
Ramping angle αmax | 1.64 mm | |
Ramping length L for αmax | 17.5 mm | |
Pack of insert screws | 219809 (8IP; 1.5 Nm) | |
Type of product | Face mill |
Référence article | 214395 20/3 | |
EAN / GTIN | 4045197221629 | |
Réf. fabricant | 214395 20/3 |