{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Cutting edge ⌀ DC | 10 mm | |
Revêtement | DLC | |
Type d'outils | Carbure monobloc | |
Norme | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | h6 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Propriété de l'angle d'hélice | Différent | |
Direction of infeed | horizontal, oblique and vertical | |
Largeur de passe ae pour le fraisage | Profondeur de coupe rainure pleine 1×D; 0,5×D pour le dressage | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Arrosage interne | non | |
Méthode d'usinage | MTC | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 30 mm | |
Recess ⌀ D1 | 9.2 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Shank form | HA | |
Corner chamfer width at 45° | 0.2 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.04 mm | |
Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
Bague de couleur | Jaune | |
Type de produit | Fraise à dresser |
Référence article | 202270 10 | |
EAN / GTIN | 4045197654960 | |
Réf. fabricant | 202270 10 |