Carbide single-lip drill Overall length L 300 mm 8 mm

Réf.: 124003 8
+ TVA en vigueur Prix et frais de livraison
Sur demande
Disponibilité
26 article(s) en stock

Sélectionnez la variante et la quantité

⌀ (mm) Prix unitaire TTC
  • Tool material: Carbide
  • Standard: Works standard
  • Number of cutting edges Z: 1
  • Point angle: 125
  • Shank: DIN 6535 HB

Ajouter à la liste d’articles

    Partager ce produit

    ou copier ce lien

    Détails du produit

    Caractéristiques techniques

    Nominal ⌀ DC 8 mm
    Coating AlTiN
    Tool material Carbide
    Standard Works standard
    Number of cutting edges Z 1
    Point angle 125 degrees
    recommended maximum drilling depth L2 225 mm
    Shank DIN 6535 HB
    Through-coolant yes, with min. 40 bar
    Pilot drill required yes, pilot drill
    Semi-Standard yes
    Flute length Lc 237 mm
    Overall length L 300 mm
    Shank ⌀ Ds 16 mm
    Type of product Jobber drill

    Numéros d’identification et classifications

    Référence article 124003 8
    EAN / GTIN 4067263121442
    Réf. fabricant 124003 8

    Tableau d’application

    Alu Plastiques
    N
    250
    Alu (à copeaux courts)
    N
    200
    Acier < 500 N/mm²
    P
    90
    Acier < 750 N/mm²
    P
    80
    Acier < 900 N/mm²
    P
    70
    Acier < 1100 N/mm²
    P
    50
    GG
    K
    80
    Huile
     
    av. arrosage max.
     

    Description

    Version:

    Single-edged straight flute deep-hole drill for drilling depths of up to 1000 mm as standard and up to 6000 mm on request. Universally designed circumferential shape of the drilling head enables reliable working in a wide range of materials.

    Note:

    For the reliable use of deep hole drills, a pilot hole of at least 4×D with pilot drill No. 122736 or No. 231605 for larger diameters, or with pilot drill No. 122606 for aluminium, is required. For deep holes > 50×D, the tool must be supported with a rest at intervals of 50×D. The specified L/D ratio gives the minimum achievable depth of hole with the respective deep-hole drill. Flute length LC = L2 + 1.5 × DC. A coolant pressure of > 40 bar is recommended.

    Téléchargements et documents

    Conseillers produits et services

    Formulaires

    If you see this, something went wrong, or you disabled javascript

    Brochure

    If you see this, something went wrong, or you disabled javascript

    Actions

    If you see this, something went wrong, or you disabled javascript
    Commande directe

    Connectez-vous à votre compte

    Etes-vous un nouveau client?

    Dans le panier

    Consultation du panier
    Consultation du panier