{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Nutenstoßhalter lang ⌀ DS 32 mm, ab Nutbreite m: 14mm
Artikel-Nr.: 290353 14
Sachnummer:
- Innenkühlung: ja
Produktdetails
Technische Daten
| Shank ⌀ | 32 mm | |
| Innenkühlung | ja | |
| suitable for slot width m | 14 mm; 16 mm | |
| Reach L1 | 180 mm | |
| Tool holder ⌀ D1 | 35 mm | |
| Centre offset L3 | 19.5 mm | |
| Min. pre-drilling -⌀ Dmin | 38.22 mm; 38.58 mm | |
| Screw | 290399 3 | |
| Schaftlänge Ls | 100 mm | |
| Schaft | Kombischaft | |
| Produktart | Nuten- und Profilstoßwerkzeug |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 290353 14 | |
| EAN / GTIN | 4045197881069 | |
| Herstellernummer | 290353 14 |
Beschreibung
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391− 290393 for exact setting of the Y-coordinate.
- For machining centres, use the alignment aid No. 290397 and a dial indicator to check the spindle orientation.