{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Codice ISO Inserto | WNMG 060408 | |
Raggio di curvatura | 0,8 mm | |
Tipo | HB7120-1 | |
Materiale da taglio | HM | |
Impiego principale | M | |
Condizione di taglio | continuo | |
Rompitrucioli | VM | |
Tolleranza | M | |
Profondità di taglio ap | 0,5 mm - 4 mm | |
Avanzamento f | 0,1 mm/gir. - 0,5 mm/gir. | |
Velocità di taglio vc applicazione principale | 80 m/min - 260 m/min | |
Numero di sostituzioni/taglienti | 6 | |
Assegnazione finitura/sgrossatura | Sgrossatura-Finitura | |
Tipo di prodotto | Inserto per tornitura |
Artikelnummer | 252064 HB7120-1 | |
EAN / GTIN | 4045197820167 | |
Herstellernummer | 252064 HB7120-1 |
Dieser Artikel |
Empfehlungen |
|
---|---|---|
GARANT Dreh-Wendeschneidplatte WNMG 060408, für mittlere Bearbeitung, Sorte HB7120-1
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
25 Stück sofort lieferbar
ab
1
St.
CHF 12.90
zzgl. MwSt.
zzgl. Versandkosten
ab
10
St.
CHF 10.75
zzgl. MwSt.
zzgl. Versandkosten
|
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
10 Stück sofort lieferbar
CHF 8.05
zzgl. MwSt.
zzgl. Versandkosten
|
|
Numero di sostituzioni/taglienti | 6 | 6 |
Codice ISO Inserto | WNMG 060408 | WNMG 060408 |
Materiale da taglio | HM | HM |
Rompitrucioli | VM | MM |
Avanzamento f | 0,1 mm/gir. - 0,5 mm/gir. | 0,12 mm/gir. - 0,45 mm/gir. |
Velocità di taglio vc applicazione principale | 80 m/min - 260 m/min | 50 m/min - 200 m/min |
Tipo di prodotto | Inserto per tornitura | Inserto per tornitura |