{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
Serie | Master INOX | |
Cutting edge ⌀ DC | 1 mm | |
Rivestimento | TiAlN | |
Materiale da taglio | HMI | |
Normativa | Norma interna | |
Modello | N | |
Tolerance nominal ⌀ | h10 | |
No. of teeth Z | 3 | |
Helix angle | 40 degrees | |
Caratteristica angolo dell’elica | differente | |
Passo dei taglienti | differente | |
Direction of infeed | horizontal, oblique and vertical | |
Larghezza di fresatura ae per operazioni di fresatura | Scanalatura piena con profondità di taglio 1×D; 0,3×D per contornatura | |
Shank | DIN 6535 HB to h6 | |
Passaggio interno per LR | no | |
Strategia di truciolatura | HPC | |
Flute length Lc | 3 mm | |
Overhang length L1 incl. recess | 13 mm | |
Recess ⌀ D1 | 0.9 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0.05 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in stainless steel > 900 N/mm2 | 0.01 mm | |
Feed fz for side milling in INOX > 900 N/mm2 | 0.012 mm | |
Colore collarino | blu | |
Tipo di prodotto | Frese per spallamenti |
Artikelnummer | 202389 1 | |
EAN / GTIN | 4045197942012 | |
Herstellernummer | 202389 1 |
Dieser Artikel |
Empfehlungen |
||||
---|---|---|---|---|---|
GARANT Master INOX VHM-Fräser HPC, TiAlN, ⌀ h10 DC: 1mm
auf Anfrage
Sofort lieferbar
132 Stück sofort lieferbar
52.70 CHF
CHF 34.25
zzgl. MwSt.
zzgl. Versandkosten
|
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
20 Stück sofort lieferbar
56.80 CHF
CHF 37.70
zzgl. MwSt.
zzgl. Versandkosten
|
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
8 Stück sofort lieferbar
52.90 CHF
CHF 31.65
zzgl. MwSt.
zzgl. Versandkosten
|
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
15 Stück sofort lieferbar
CHF 44.85
zzgl. MwSt.
zzgl. Versandkosten
|
auf Anfrage
Lieferung in 3 - 4 Arbeitstagen
2 Stück sofort lieferbar
CHF 27.10
zzgl. MwSt.
zzgl. Versandkosten
|
|
Corner chamfer angle | 45 degrees | 45 grado | 45 grado | 45 grado | 45 grado |
Flute length Lc | 3 mm | 2,5 mm | 2,5 mm | 2,5 mm | 2,5 mm |
Materiale da taglio | HMI | HMI | HMI | HMI | HMI |
Caratteristica angolo dell’elica | differente | differente | differente | differente | differente |
Tolerance nominal ⌀ | h10 | f8 | f8 | h10 | e8 |
Direction of infeed | horizontal, oblique and vertical | orizzontale, obliquo e verticale | orizzontale, obliquo e verticale | orizzontale, obliquo e verticale | orizzontale, obliquo e verticale |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |