{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped hammer drill SDS-plus 14X450 mm
Article no.: 789000 14X450
Article code:
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Plus
Product details
Technical Data
| ⌀ | 14 mm | |
| overall length | 450 mm | |
| Flute length | 400 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Plus | |
| Number of cutting edges Z | 2 | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789000 14X450 | |
| EAN / GTIN | 4002395309047 | |
| Manufacturer number | 4932307088 |
Description
Version:
The 3 special Power Breaker projecting teeth of the M2 generate micro-cracks in the material being drilled, these promote quicker advance by the drill and faster removal of material. The high quality carbide tip with particularly strong brazed joint guarantees long tool life, even in reinforced concrete. The reinforced core flutes (KVS) are vibration-damping, so the impact energy is transmitted directly to the drilling tip.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using extra long drills (> 500 mm), first drill a pilot hole with a shorter drill of the same diameter (prevents bending and breakage).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Carbide-tipped hammer drill SDS-plus 14X450 mm
on request
In stock
18 pieces in stock
BGN 44.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
BGN 36.32
plus VAT at the current rate
Prices plus delivery costs
|
|
| ⌀ | 14 | 14 |
| Number of cutting edges Z | 2 | 2 |
| overall length | 450 | 450 |
| Shank | SDS Plus | SDS Plus |
| Tool material | Carbide | Carbide |
| Use with impact / without impact | Impact drilling | Impact drilling |
| Type of product | Masonry drill | Masonry drill |