{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque screwdriver with scale, to take interchangeable blades 500 cNm
Article no.: 659957 500
Article code:
Click to enlarge image
Click to enlarge image
6 mm blade
- Kiristyssuunta: Right-hand tightening
- Mittaustarkkuus vääntömomentti: ±6
- Tarkastustodistus: Valmistajan tarkastuspöytäkirja
Product details
Technical Data
| Suurin kiristysmomentti | 500 cNm | |
| Kiristyssuunta | Right-hand tightening | |
| Mittaustarkkuus vääntömomentti | ±6 % | |
| Tarkastustodistus | Valmistajan tarkastuspöytäkirja | |
| Kokonaispituus L | 124 mm | |
| Vääntömomenttialue | 100 cNm - 500 cNm | |
| Vääntömomenttialue | 1 Nm - 5 Nm | |
| Asteikkojako: 1 jakoviiva = | 10 cNm | |
| Sopivat vaihtoterät | 6 mm | |
| Näyttö | analoginen | |
| Irrotussignaali | akustinen; haptinen | |
| Laukaisuperiaate | mekaaninen lyhyt laukaisu | |
| Liitäntämuoto | Vaihdettava terä | |
| mittaustekniikka | mekaaninen | |
| Torque fixed setting | no | |
| Tiedot tallennettavissa | ei | |
| Laukaisuarvon asetus | asetusasteikko | |
| Palaute | irrottava | |
| Mittaustapa | Vääntömomentti | |
| Laukaisuarvon säädettävyys | säädettävä | |
| Standardi | DIN EN ISO 6789 | |
| Type of product | Torque screwdriver |
Identification numbers & Classifications
| Article number | 659957 500 | |
| EAN / GTIN | 7610733291717 | |
| Manufacturer number | 8317.A 1,0-5,0 NM |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
The desired torque is set using an adjustment wheel at the end of the handle. Putting the wheel into the locked position prevents inadvertent changes to the setting. Easy to read micrometer scale, protected against dirt.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.