{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Abrasive sleeve, conical (A) 150 grit fine 29X30 mm
Article no.: 553870 29X30
Article code:
- Grinding medium code: A
Product details
Technical Data
| Grinding media | Standard Aluminium Oxide | |
| Grinding medium code | A | |
| Grit | 150 | |
| Grit designation | fine | |
| Sleeve shape | conical | |
| largest sleeve ⌀ | 29 mm | |
| Sleeve width | 30 mm | |
| Type of product | Abrasive sleeve |
Identification numbers & Classifications
| Article number | 553870 29X30 | |
| EAN / GTIN | 4045197240620 | |
| Manufacturer number | 553870 29X30 |
Application Table
Description
Version:
Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion.
Aluminium Oxide (A) for general-purpose grinding work.
The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders.
Aluminium Oxide (A) for general-purpose grinding work.
The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders.
Application:
Abrasive sleeves are predominantly used for surface grinding tasks which require the removal of large amounts of material − even at sharp edges.
Suitable for:
Abrasive sleeve holder No. 553830.