{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stationary machine vice, Type: 150M
Article no.: 362175 150M
Copy
Article code:
Copy
- Type: L-keys for hexagonal socket screws
Product details
Technical Data
| Type | L-keys for hexagonal socket screws | |
| Clamping range b | 0 mm - 232 mm | |
| Clamping force | 36 kN | |
| Base body height c +/- 0.012 | 73 mm | |
| Jaw height C | 44.5 mm | |
| Jaw width A | 151 mm | |
| Base body length a | 427 mm | |
| Base body width B | 186 mm | |
| L1 | 101.6 mm | |
| L2 | 58.7 mm | |
| L3 | 90.5 mm | |
| Hole centre spacing f | 98.4 mm | |
| Width across flats AF | 19 mm | |
| Colour code for suitable accessories | NC-HOLEX | |
| Quick adjustment | no | |
| Interchangeable jaws | yes | |
| Type of product | Machine vice |
Identification & Classification
| Article number |
362175 150M
Copy |
|
| EAN / GTIN |
4062406384081
Copy |
|
| Manufacturer number |
362175 150M
Copy |
|
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Sturdy base body of cast iron, slides and base area hardened. Cleaning holes in the base body for good flow of chips. Less component lift-off thanks to special transfer of force in the mobile jaw.
Application:
Versatile clamping unit for machining centres.
Supplied with:
Incl. 2 pcs. top jaws, 2 pcs. front jaws No. 362181 and 1 pc. hand crank.
Optional extras:
Front jaws No. 362177 – 362183, crank No. 362190, spare-parts set No. 362199. Mounted with Tee bolts No. 375300 and aligned with tenons No. 375365.
Note:
Alignment dimensions not compatible with those of other manufacturers.
Metric version – screws and threads in metric version, drive hexagon = 19 mm AF.
Warning:
Intended use
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only on a flat and clean base.
- For work in industrial environments.
- Use only in enclosed spaces.
- Use for clamping workpieces.
- For clamping workpieces in the blank or partially machined state.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Use only original spare parts and wearing parts.
- Do not operate outside of the operating parameters.