{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Soft monoblock jaw set, 3 pieces straight serration 160
Article no.: 313227 160
Article code:
Product details
Technical Data
| for chuck type | 160 mm | |
| Length L | 65 mm | |
| Width B | 20 mm | |
| Height H | 55.5 mm | |
| Type of product | Self-centring chuck jaws |
Identification numbers & Classifications
| Article number | 313227 160 | |
| EAN / GTIN | 2050001929198 | |
| Manufacturer number | 0164106 |
Description
Version:
Serrations hardened and ground.
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
Material:
C45, annealed
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
- Hard top and stepped jaws purchased subsequently must be ground internally in the chuck for concentricity and run-out.
- Please check the serrations when matching to lathe chucks.