{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Keyway broaching toolholder, long ⌀ DS 25 mm, from slot width m: 5mm
Article no.: 290350 5
Article code:
- Through-coolant: yes
Product details
Technical Data
| Shank ⌀ | 25 mm | |
| Through-coolant | yes | |
| suitable for slot width m | 5 mm | |
| Reach L1 | 66 mm | |
| Tool holder ⌀ D1 | 12 mm | |
| Centre offset L3 | 6.35 mm | |
| Min. pre-drilling -⌀ Dmin | 12.82 mm | |
| Screw | 290399 1 | |
| Shank length Ls | 90 mm | |
| Shank | Combination shank | |
| Type of product | Keyway broaching and profile slotting tool |
Identification numbers & Classifications
| Article number | 290350 5 | |
| EAN / GTIN | 4045197880949 | |
| Manufacturer number | 290350 5 |
Description
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391− 290393 for exact setting of the Y-coordinate.
- For machining centres, use the alignment aid No. 290397 and a dial indicator to check the spindle orientation.