{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DNGA 150604, KBN35M, Type: MET
Article no.: 255631 MET
Article code:
Product details
Technical Data
| ISO code indexable insert | DNGA 150604 | |
| Corner radius | 0.4 mm | |
| Grade | KBN35M | |
| Tool material | CBN | |
| Cutting conditions | slightly interrupted | |
| Cutting edge version | MET | |
| Cutting depth ap | 0.1 mm - 0.3 mm | |
| Feed f | 0.1 mm/rev. - 0.2 mm/rev. | |
| Cutting speed vc main application | 100 m/min - 180 m/min | |
| Number of changes/inserts | 2 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 255631 MET | |
| EAN / GTIN | 4960664544417 | |
| Manufacturer number | TBA02230 |
Application Table
H
H
H
Description
Version:
MEGACOAT coated CBN inserts.
MultiEdge Tough; 2 or 3 cutting edges per insert, with special honing for optimisation in interrupted cutting.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
DNGA 150604, KBN35M, Type: MET
on request
In stock
23 pieces in stock
BGN 179.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
BGN 55.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
BGN 134.95
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner radius | 0.4 mm | 0.4 mm | 0.4 mm |
| ISO code indexable insert | DNGA 150604 | DNMA 150604 | DNGA 150604 |
| Finishing/roughing assignment | Finishing | Finishing | Finishing |
| Cutting edge version | MET | M | G |
| Cutting conditions | slightly interrupted | continuous | continuous; heavily interrupted; slightly interrupted |
| Feed f | 0.1 mm/rev. - 0.2 mm/rev. | 0.1 mm/rev. - 0.2 mm/rev. | 0.05 mm/rev. - 0.15 mm/rev. |
| Cutting speed vc main application | 100 m/min - 180 m/min | 80 m/min - 200 m/min | 90 m/min - 140 m/min |