{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Product details
Technical Data
| ISO code indexable insert | WNMG 080408 | |
| Corner radius | 0.8 mm | |
| Grade | KW10 | |
| Tool material | Carbide | |
| Main application | N | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | AH | |
| Tolerance | M | |
| Cutting depth ap | 1 mm - 4 mm | |
| Feed f | 0.1 mm/rev. - 0.35 mm/rev. | |
| Cutting speed vc main application | 60 m/min - 400 m/min | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252114 KW10 | |
| EAN / GTIN | 4960664246595 | |
| Manufacturer number | TWE64432 |
Application Table
N
N
N
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
WN.G 080408 KW10
on request
In stock
249 pieces in stock
BGN 31.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
from
1
Pieces
BGN 29.42
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
BGN 24.53
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
from
1
Pieces
BGN 27.93
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
BGN 23.27
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | |
| Cutting conditions | slightly interrupted | slightly interrupted | slightly interrupted |
| Cutting depth ap | 1 mm - 4 mm | 0.2 mm - 5 mm | 0.2 mm - 5 mm |
| Chip breaker | AH | AM1 | AM1 |
| Feed f | 0.1 mm/rev. - 0.35 mm/rev. | 0.05 mm/rev. - 0.6 mm/rev. | 0.05 mm/rev. - 0.6 mm/rev. |
| Main application | N | N | N |
| Cutting speed vc main application | 60 m/min - 400 m/min | 400 m/min - 700 m/min | 400 m/min - 700 m/min |