{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pro Drill indexable drill with combination shank, for indexable inserts SOMT / XOMT, ⌀ DC: 14mm
Article no.: 235010 14
Article code:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ISO 9766
- Use for drilling: limited drilling with oblique exit; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | HOLEX Pro | |
| Nominal ⌀ D | 14 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited drilling with oblique exit; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 59 mm | |
| Overhang LA | 74 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOMT05T204 / XOMT05T204 | |
| Pack of insert screws | 232980 1 (TX6;0.4Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 124 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235010 14 | |
| EAN / GTIN | 4062406253387 | |
| Manufacturer number | 235010 14 |
Description
Version:
HOLEX Pro Drill indexable drills combine cost efficiency with technically fully developed capability.
For use up to 4×D in challenging drilling applications.
Bore tolerance: -0.05 / +0.3 mm
For use up to 4×D in challenging drilling applications.
Bore tolerance: -0.05 / +0.3 mm
Application:
With indexable inserts No. 235030 – 235082.
Both SOMT inserts for the outer insert seat and also XOMT inserts for the inner insert seat are required.
Both SOMT inserts for the outer insert seat and also XOMT inserts for the inner insert seat are required.
Supplied with:
With insert screws (supplied without indexable inserts).
Recommendation:
When spot-drilling reduce the feed rate to 70%.