{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17 32/3 mm
Article no.: 227500 32/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 130 mm | |
| Shank ⌀ Ds h6 | 32 mm | |
| ⌀ D3 | 25 mm | |
| Circular interpolation milling ⌀ Dmin | 57 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 0.61 degrees | |
| Ramping length L for αmax | 23.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227500 32/3 | |
| EAN / GTIN | 4960664396191 | |
| Manufacturer number | THN03256 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEC17 32/3 mm
on request
In stock
2 pieces in stock
BGN 657.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
BGN 850.19
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
BGN 834.44
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 40 | 70 | 30 |
| Milling application | Circular milling ;Ramping ;End milling | End milling ;Circular milling ;Ramping | Corner milling |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | BDMT 170408 | AP.. 1335.. | LO.U0904.. |
| Cutting edge ⌀ DC | 32 | 32 | 32 |
| Setting angle κ | 90 | 90 | 90 |
| Type of product | End / face mill | End / face mill | End / face mill |