{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Number of cutting edges Z | 2 | |
Shank type | Weldon shank | |
Setting angle κ | 90 degrees | |
Milling application | Circular milling; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 10 mm | |
Overhang L1 | 25 mm | |
Overall length Ltot | 68 mm | |
Shank ⌀ Ds h6 | 16 mm | |
⌀ D3 | 10 mm | |
Circular interpolation milling ⌀ Dmin | 26 mm | |
Circular interpolation milling ⌀ Dmax | 30 mm | |
Ramping angle αmax | 1.27 degrees | |
Ramping length L for αmax | 9 mm | |
suitable indexable insert | BD.. 11T3 | |
Insert screw | 229708 (T8; 1.2 Nm) | |
Type of product | End / face mill |
Article number | 227305 16/2 | |
EAN / GTIN | 4960664406517 | |
Manufacturer number | THN63151 |
This article |
Recommendations |
||
---|---|---|---|
Indexable milling cutter 90° MEC11T 16/2 mm
on request
In stock
2 pieces in stock
BGN 477.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
70 pieces in stock
BGN 446.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
BGN 304.77
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 |
Overhang L1 | 25 | 37 | 37 |
Shank type | Weldon shank | Weldon shank | Weldon shank |
Setting angle κ | 90 | 90 | 90 |
Shank ⌀ Ds h6 | 16 | 16 | 16 |
Circular interpolation milling ⌀ Dmin | 26 | 29 | 29 |
Ramping length L for αmax | 9 | 10.85 | 10.85 |