{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEV, Plain shank, ⌀ D / number of teeth Z: 25/3mm
Article no.: 226400 25/3
Article code:
- Setting angle κ: 90
- Milling application: Plunging; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Plunging; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 6 mm | |
| Overhang L1 | 29 mm | |
| Overall length Ltot | 120 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| ⌀ D3 | 20 mm | |
| Circular interpolation milling ⌀ Dmin | 45 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.6 degrees | |
| Ramping length L for αmax | 19.25 mm | |
| suitable indexable insert | TOMT060508 | |
| Insert screw | 229723 1 (10IP; 2.0 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 226400 25/3 | |
| EAN / GTIN | 4960664914067 | |
| Manufacturer number | THN08480 |
Description
Version:
High-performance milling cutter with newly developed triangular indexable insert for corner and slot milling and ramping with lower cutting forces and increased stability.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Indexable milling cutter 90° MEV, Plain shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
3 pieces in stock
BGN 580.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
BGN 733.23
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 |
| Overhang L1 | 29 mm | 30 mm |
| Cutting edge ⌀ DC | 25 mm | 25 mm |
| ⌀ D3 | 20 mm | 22 mm |
| Circular interpolation milling ⌀ Dmin | 45 mm | 47 mm |
| Ramping angle αmax | 0.6 degrees | 0.88 degrees |
| Type of product | End / face mill | End / face mill |