{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High feed rate milling cutter MFH Harrier, with threaded shank, ⌀ D / number of teeth Z: 32/3mm
Article no.: 222060 32/3
Article code:
- Milling application: Circular milling; Plunging; Ramping
- Machining strategy: HPC
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Milling application | Circular milling; Plunging; Ramping | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| ⌀ D3 | 15 mm | |
| maximum cutting depth ap max | 1.5 mm | |
| maximum cutting depth ap max for LD geometry | 3.5 mm | |
| Overall length Ltot | 40 mm | |
| Mounting thread M | M16 | |
| Circular interpolation milling ⌀ Dmin | 47 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Ramping angle αmax | 1.43 degrees | |
| Ramping length L for αmax | 14.4 mm | |
| suitable indexable insert | SOMT.. | |
| Indexable insert size | 10 | |
| Insert screw | 229717 (15IP; 3.5 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 222060 32/3 | |
| EAN / GTIN | 4960664712489 | |
| Manufacturer number | THN07553 |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.