{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Shoulder mill 90° 50/6 mm
Article no.: 215850 50/6
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 50 mm | |
| Number of cutting edges Z | 6 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| ⌀ D3 | 47 mm | |
| Circular interpolation milling ⌀ Dmin | 97 mm | |
| Circular interpolation milling ⌀ Dmax | 98 mm | |
| Ramping angle αmax | 0.32 degrees | |
| Ramping length L for αmax | 44.85 mm | |
| suitable indexable insert | AP.. 1003.. | |
| Pack of insert screws | 219814 (8IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215850 50/6 | |
| EAN / GTIN | 4045197221759 | |
| Manufacturer number | 215850 50/6 |
Description
Version:
With bore for screw fixing.
Application:
Universal application in all materials.
- Angle and slot milling, milling pockets, circular milling, bore milling, peripheral milling.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Shoulder mill 90° 50/6 mm
on request
In stock
17 pieces in stock
BGN 820.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
BGN 1,273.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
BGN 818.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
BGN 1,279.78
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling application | Circular milling ;Ramping ;End milling | Corner milling | End milling ;Circular milling ;Ramping | Corner milling |
| Overall length Ltot | 40 | 40 | 40 | 40 |
| Through-coolant | yes | yes | yes | yes |
| suitable indexable insert | AP.. 1003.. | SO.. 0836.. | AP.. 1335.. | LO.. 130708 |
| Shank type | with bore | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 50 | 50 | 50 | 50 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |