{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Chamfer mill, with bore, Angle γ: 75°
Article no.: 215700 75
Article code:
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| suitable indexable insert | AP.. 1604.. | |
| Angle γ | 75 degrees | |
| Shank type | with bore | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of effective inserts Zeff | 3 | |
| Number of indexable inserts | 6 | |
| Overall length Ltot | 60 mm | |
| smallest ⌀ D | 35 mm | |
| largest ⌀ D1 | 50.7 mm | |
| achievable chamfer width b | 8 mm | |
| achievable chamfer length l | 30 mm | |
| achievable chamfer height h | 29.5 mm | |
| Mounting bore ⌀ | 22 mm | |
| Feed rate per tooth at hmax | 0.11 mm | |
| Pack of insert screws | 219811 (15IP; 5.0 Nm) | |
| Type of product | Indexable end mill |
Identification numbers & Classifications
| Article number | 215700 75 | |
| EAN / GTIN | 4045197410542 | |
| Manufacturer number | 215700 75 |