{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Shoulder mill 90°, Weldon shank, ⌀ D / number of teeth Z: 20/3mm
Article no.: 215176 20/3
Article code:
- Setting angle κ: 90
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Weldon shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum cutting depth ap max | 2 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 90 mm | |
| Shank ⌀ Ds h6 | 20 mm | |
| suitable indexable insert | XNEX 040308 | |
| Pack of insert screws | 219878 1 (7IP; 1.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215176 20/3 | |
| EAN / GTIN | 4062406569976 | |
| Manufacturer number | 215176 20/3 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
Shoulder mill 90°, Weldon shank, ⌀ D / number of teeth Z: 20/3mm
on request
In stock
25 pieces in stock
BGN 697.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
BGN 605.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
102 pieces in stock
BGN 591.53
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
BGN 641.01
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
BGN 757.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
BGN 721.98
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
BGN 395.85
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length Ltot | 90 mm | 90 mm | 90 mm | 90 mm | 90 mm | 101 mm | 90 mm |
| suitable indexable insert | XNEX 040308 | AP.. 1335.. | AP.. 1003.. | AP.. 1003.. | LO.U0904.. | LO.U0904.. | AP.. 1003.. |
| Shank type | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank | Weldon shank |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
| Pack of insert screws | 219878 1 (7IP; 1.2 Nm) | 219826 (8IP; 2.2 Nm) | 219814 (8IP; 1.2 Nm) | 219814 (8IP; 1.2 Nm) | 219868 2 (8IP; 1.2 Nm) | 219868 2 (8IP; 1.2 Nm) | 219814 (8IP; 1.2 Nm) |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Shank ⌀ Ds h6 | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |