{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Number of cutting edges Z: 5
- Setting angle κ: 43
- Milling application: Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with bore | |
| Setting angle κ | 43 degrees | |
| Milling application | Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| maximum external ⌀ Dmax | 72 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| suitable indexable insert | OF.. 050405 | |
| Pack of insert screws | 219808 (15IP; 3.8 Nm) | |
| Setting angle κ | 43 degrees | |
| Type of product | Face mill |
Identification numbers & Classifications
| Article number | 213300 63/5 | |
| EAN / GTIN | 4045197702012 | |
| Manufacturer number | 213300 63/5 |
Description
Version:
43° indexable face mill with up to 8 edges per milling insert.
Application:
Very good surface finishes are obtained due to the positive geometry. Smooth-cutting face mills.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable face mill 43° Octo 63/5 mm
on request
In stock
30 pieces in stock
BGN 931.16
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
BGN 1,030.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1 pieces in stock
BGN 1,043.61
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 |
| Overall length Ltot | 40 mm | 40 mm | 40 mm |
| Through-coolant | yes | yes | yes |
| suitable indexable insert | OF.. 050405 | SE.. 1203.. | SD... 0903 |
| Shank type | with bore | with bore | with bore |
| Cutting edge ⌀ DC | 63 mm | 63 mm | 63 mm |
| Type of product | Face mill | Face mill | Face mill |