{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Machining strategy: HPC
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 42 mm | |
| Number of cutting edges Z | 5 | |
| Shank type | with threaded shank | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Machining strategy | HPC | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 29 mm | |
| maximum cutting depth ap max | 3 mm | |
| Overall length Ltot | 42 mm | |
| Mounting thread M | M16 | |
| suitable indexable insert | CPHX 09T3.. | |
| Pack of insert screws | 219799 4 (15IP; 3.8 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212538 42/5 | |
| EAN / GTIN | 4062406098797 | |
| Manufacturer number | 212538 42/5 |
Description
Version:
Precision finish milling for extremely efficient en pre-finish machining and finish machining. Due to the revised wiper geometry, suitable for outstanding surface quality in ground finish standard. Extreme time saving available due to a large line skip and a high feed rate per tooth.
Application:
Typical tool for tool and die manufacturing.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Finishing mill 42/5 mm
on request
In stock
14 pieces in stock
BGN 692.74
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
BGN 521.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
BGN 524.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2 pieces in stock
BGN 771.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
BGN 769.22
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 5 | 5 | 5 | 5 | 5 |
| Milling application | End milling ;Circular milling ;Ramping | Circular milling ;Ramping | Circular milling ;Ramping | Plunging ;Circular milling ;Plunging | Ramping ;Ramping |
| Overall length Ltot | 42 | 42 | 42 | 40 | 42 |
| Through-coolant | yes | yes | yes | yes | yes |
| Shank type | with threaded shank | with threaded shank | with threaded shank | with threaded shank | with threaded shank |
| Cutting edge ⌀ DC | 42 | 42 | 42 | 42 | 42 |
| Type of product | Copy mill | Copy mill | Copy mill | Copy mill | Copy mill |