{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill 10 mm
Article no.: 207154 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 14 mm | |
| Radius R | 5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.068 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207154 10 | |
| EAN / GTIN | 4062406265717 | |
| Manufacturer number | 207154 10 |
Application Table
N
350
N
250
P
160
P
140
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Description
Note:
Successor product to No. 207155.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide ball nose slot drill 10 mm
on request
In stock
269 pieces in stock
BGN 116.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
BGN 120.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
136 pieces in stock
BGN 266.54
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
40 pieces in stock
BGN 287.89
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overall length L | 100 mm | 100 mm | 100 mm | 100 mm |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Radius R | 5 mm | 5 mm | 5 mm | 5 mm |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Type | N | N | H | H |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm |