{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Diabolo solid carbide end torus cutter HPC, TiAlN, ⌀ h9 DC: 4mm
Article no.: 206275 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: h9
- No. of teeth Z: 2
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 4 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | h9 | |
| No. of teeth Z | 2 | |
| Helix angle | 12 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Dimension ap max transverse | 0.15 mm | |
| Programming radius | 0.5 mm | |
| Flute length Lc | 2.5 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| Recess ⌀ D1 | 3.6 mm | |
| Overall length L | 85 mm | |
| Shank ⌀ Ds | 6 mm | |
| Setting angle κ | 11 degrees | |
| Feed f z in steel < 60 HRC | 0.049 mm | |
| Colour ring | red | |
| Type of product | End torus mill |
Identification numbers & Classifications
| Article number | 206275 4 | |
| EAN / GTIN | 4045197860859 | |
| Manufacturer number | 206275 4 |
Application Table
P
160
H
145
H
130
H
95
H
70
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining.
Tolerance: Corner radius R1 = ±0.01 mm.
Special centre cutting edge geometry for traverse milling at very high feed rates.
Special geometry, coating and carbide for hard machining.
Tolerance: Corner radius R1 = ±0.01 mm.
Special centre cutting edge geometry for traverse milling at very high feed rates.
Application:
For copy and traverse milling in hard machining under HPC / HSC conditions. Special milling strategies allow very high metal removal rates.
Note:
Successor product to No. 206278.
Tools can be reground.
Tools can be reground.