{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC / TPC, TiAlN, ⌀ d11 DC: 8mm
Article no.: 205554 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: NR
- Tolerance nominal ⌀: d11
- No. of teeth Z: 5
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | d11 | |
| No. of teeth Z | 5 | |
| Helix angle | 42 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.4×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC; TPC | |
| Flute length Lc | 24 mm | |
| Overhang length L1 incl. recess | 30 mm | |
| Recess ⌀ D1 | 7.4 mm | |
| Overall length L | 68 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205554 8 | |
| EAN / GTIN | 4045197959942 | |
| Manufacturer number | 205554 8 |
Application Table
P
200
P
180
P
160
P
140
P
110
M
50
M
35
K
200
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining.
Problem-solver for TPC machining.
Problem-solver for TPC machining.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC / TPC, TiAlN, ⌀ d11 DC: 8mm
on request
In stock
32 pieces in stock
BGN 289.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
491 pieces in stock
BGN 139.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
157 pieces in stock
BGN 165.09
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
235 pieces in stock
BGN 106.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,127 pieces in stock
BGN 86.15
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
194 pieces in stock
BGN 101.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
135 pieces in stock
BGN 132.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
102 pieces in stock
BGN 157.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
314 pieces in stock
BGN 110.89
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
151 pieces in stock
BGN 87.72
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 30 mm | 25 mm | 30 mm | 30 mm | 27 mm | 32 mm | 25 mm | 30 mm | 30 mm | 25 mm |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 42 degrees | 45 degrees | 45 degrees | 38 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 38 degrees | 42 degrees |
| Tolerance nominal ⌀ | d11 | f8 | f8 | f8 | 0 / -0.03 | 0 / -0.03 | f8 | f8 | 0 / -0.03 | e8 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |