{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Diabolo | |
Cutting edge ⌀ DC | 10 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | H | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 6 | |
Helix angle | 50 degrees | |
Helix angle characteristic | unequal spacing | |
Direction of infeed | horizontal and oblique | |
Cutting width ae for milling operation | 0.05×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 30 mm | |
Overall length L | 85 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for side milling in steel < 65 HRC | 0.02 mm | |
Colour ring | red | |
Type of product | End / face mill |
Article number | 203282 10 | |
EAN / GTIN | 4045197597502 | |
Manufacturer number | 203282 10 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
GARANT Diabolo solid carbide milling cutter HPC 10 mm
on request
In stock
134 pieces in stock
BGN 291.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
237 pieces in stock
BGN 472.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
BGN 141.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
159 pieces in stock
BGN 310.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
125 pieces in stock
BGN 130.90
plus VAT at the current rate
Prices plus delivery costs
|
|
Through-coolant | no | no | no | no | no |
Cutting edge ⌀ DC | 10 | 10 | 10 | 10 | 10 |
Tolerance nominal ⌀ | e8 | 0 / -0.02 | h10 | e8 | 0 / -0.02 |
Type | H | H | H | H | H |
No. of teeth Z | 6 | 6 | 6 | 6 | 6 |
Shank ⌀ Ds | 10 | 10 | 10 | 10 | 10 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |