{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, TiAlN, ⌀ DC: 5mm
Article no.: 203246 5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: H
- Tolerance nominal ⌀: 0 / -0.01
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.01 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.05 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 55 HRC | 0.016 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203246 5 | |
| EAN / GTIN | 4062406252427 | |
| Manufacturer number | 203246 5 |
Application Table
P
160
P
95
P
85
H
75
H
65
H
50
H
30
Description
Version:
Strengthened core and geometry for hard machining, without dynamic helical pitch.
Tolerance: Size nominal ⌀ Dc 0/-0.01 mm.
Application:
For profile milling as finishing.
(Plunge cutting only to shallow depths).
(Plunge cutting only to shallow depths).
Note:
Successor product to No. 203240.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ DC: 5mm
on request
In stock
151 pieces in stock
BGN 59.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
535 pieces in stock
BGN 111.56
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
304 pieces in stock
BGN 238.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
BGN 66.13
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | |||
| Colour ring | red | red | red | red |
| Through-coolant | no | no | no | no |
| Standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Shank | DIN 6535 HA to h6 | |||
| Helix angle | 45 degrees | |||
| Direction of infeed | horizontal and oblique | |||