{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter HPC, TiAlN, ⌀ DC: 8mm
Article no.: 203212 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 6 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 19 mm | |
| Overall length L | 64 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 70 HRC | 0.025 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203212 8 | |
| EAN / GTIN | 4045197641007 | |
| Manufacturer number | 203212 8 |
Application Table
H
145
H
100
H
80
H
75
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 2 − 5: Recess angle α = 15°.
Tolerance:
- Size nominal ⌀: DC ≤ size 12: 0 / −0.02 mm;
- Size nominal ⌀: DC from size 16: 0 / -0.03 mm.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
For profile milling as finishing.
(Plunge cutting only to shallow depths.)
Note:
For materials > 65 HRC: ae = 0.02×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide milling cutter HPC, TiAlN, ⌀ DC: 8mm
on request
In stock
449 pieces in stock
BGN 330.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
BGN 206.92
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,231 pieces in stock
BGN 145.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
263 pieces in stock
BGN 77.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
310 pieces in stock
BGN 209.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
BGN 71.07
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Overall length L | 64 mm | 64 mm | 63 mm | 63 mm | 100 mm | 63 mm |
| Through-coolant | no | no | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 |
| Helix angle | 45 degrees | 48 degrees | 50 degrees | 50 degrees | 50 degrees | 45 degrees |
| Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique | horizontal and oblique | horizontal and oblique | horizontal and oblique |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |