{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Diabolo | |
Cutting edge ⌀ DC | 10 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | H | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 6 | |
Helix angle | 50 degrees | |
Helix angle characteristic | unequal spacing | |
Direction of infeed | horizontal and oblique | |
Cutting width ae for milling operation | 0.05×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 25 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for side milling in steel < 65 HRC | 0.02 mm | |
Colour ring | red | |
Type of product | End / face mill |
Article number | 203211 10 | |
EAN / GTIN | 4045197597427 | |
Manufacturer number | 203211 10 |
This article |
Recommendations |
||
---|---|---|---|
GARANT Diabolo solid carbide milling cutter HPC 10 mm
on request
In stock
924 pieces in stock
BGN 250.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
203 pieces in stock
BGN 133.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
85 pieces in stock
BGN 121.01
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | TiAlN | TiAlN |
Colour ring | red | red | red |
Overall length L | 72 | 72 | 72 |
Through-coolant | no | no | no |
Standard | DIN 6527 | DIN 6527 | DIN 6527 |
Tool material | Solid carbide | Solid carbide | Solid carbide |
Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique |