{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC 8 mm
Article no.: 202976 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 12 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.1 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 60 HRC | 0.02 mm | |
| Feed fz for side milling in steel < 60 HRC | 0.025 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202976 8 | |
| EAN / GTIN | 4045197431288 | |
| Manufacturer number | 202976 8 |
Application Table
P
160
P
115
P
115
H
60
H
30
H
25
H
20
Description
Version:
Significant cutting force reduction due to 45° helix.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
For materials > 55 HRC we recommend reducing the depth of cut to ap =0.25×D...0.5×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide roughing end mill MTC 8 mm
on request
In stock
341 pieces in stock
BGN 129.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
222 pieces in stock
BGN 113.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
376 pieces in stock
BGN 68.37
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
BGN 116.51
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | AlCrN | TiSiN | TiAlN |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | 0.3×D for side milling; 0.3×D for side milling |
| Colour ring | red | green | green | without |
| Through-coolant | no | no | no | no |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Flute length Lc | 12 mm | 12 mm | 12 mm | 12 mm |
| No. of teeth Z | 4 | 4 | 4 | 4 |