{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 3 mm
Article no.: 202725 3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- No. of teeth Z: 4
- Helix angle: 30
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 12 mm | |
| Overhang length L1 incl. recess | 17 mm | |
| Recess ⌀ D1 | 2.8 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.01 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.011 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202725 3 | |
| EAN / GTIN | 4045197746412 | |
| Manufacturer number | 202725 3 |
Application Table
N
280
P
100
P
70
P
60
H
35
M
80
M
60
K
90
Description
Version:
Double relief ground side clearance angle.
Without 45° cutting edge chamfer.
Without 45° cutting edge chamfer.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter 3 mm
on request
In stock
258 pieces in stock
BGN 60.51
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3,901 pieces in stock
BGN 30.26
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN |
| Through-coolant | no | no |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Helix angle | 30 | 30 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 3 | 3 |
| Type of product | End / face mill | End / face mill |