{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end mill HPC 6 mm
Article no.: 202552 6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.3×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 18 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| Recess ⌀ D1 | 5.5 mm | |
| Overall length L | 62 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HA | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.07 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202552 6 | |
| EAN / GTIN | 4045197948250 | |
| Manufacturer number | 202552 6 |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
N
Description
Version:
Sturdy roughing end mill without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.
With strong core, special chip breaker recesses and large polished flutes.
Application:
For roughing milling with high demands on the component surface.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide end mill HPC 6 mm
on request
In stock
151 pieces in stock
BGN 167.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
156 pieces in stock
BGN 165.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
188 pieces in stock
BGN 152.04
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 24 mm | 24 mm | 25 mm |
| Coating | DLC | ZOX | TiAlN |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Helix angle characteristic | unequal spacing | unequal spacing | unequal spacing |
| No. of teeth Z | 4 | 4 | 4 |
| Corner chamfer width at 45° | 0.2 mm | 0.2 mm | 0.1 mm |
| Type of product | End / face mill | End / face mill | End / face mill |