{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 4 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 4 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 13 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.015 mm | |
Feed fz for side milling in short-chipping aluminium | 0.025 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202515 4 | |
EAN / GTIN | 4045197588500 | |
Manufacturer number | 202515 4 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
![]() ![]() Solid carbide milling cutter 4 mm
on request
In stock
27 pieces in stock
BGN 121.91
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
BGN 83.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
629 pieces in stock
BGN 71.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
75 pieces in stock
BGN 159.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
268 pieces in stock
BGN 123.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
75 pieces in stock
BGN 99.41
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Tool material | Solid carbide | Solid carbide | Solid carbide | solid carbide | Solid carbide | Solid carbide |
Helix angle | 45 degrees | 38 degrees | 45 degrees | 45 degrees | 38 degrees | 38 degrees |
No. of teeth Z | 4 | 4 | 4 | 2 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |