{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 4.5 mm | |
Coating | TiAlN | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | N | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 13 mm | |
Overhang length L1 incl. recess | 21 mm | |
Recess ⌀ D1 | 4.3 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner chamfer width at 45° | 0.1 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.02 mm | |
Feed fz for side milling in steel < 900 N/mm2 | 0.023 mm | |
Correction factor for vc | 1.5 | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 202280 4,5 | |
EAN / GTIN | 4045197116338 | |
Manufacturer number | 202280 4,5 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide slot drill DIN 6535 HA, TiAlN, ⌀ DC: 4,5mm
on request
In stock
74 pieces in stock
BGN 80.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
21 pieces in stock
BGN 82.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
BGN 105.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
225 pieces in stock
BGN 40.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
278 pieces in stock
BGN 31.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
241 pieces in stock
BGN 44.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
BGN 102.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
198 pieces in stock
BGN 48.37
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Through-coolant | no | no | no | no | no | no | no | no |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | HB with h6 | HB with h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 4.5 mm | 4.5 mm | 4.5 mm | 4.5 mm | 4.5 mm | 4.5 mm | 4.5 mm | 4.5 mm |
Flute length Lc | 13 mm | 13 mm | 13 mm | 7 mm | 7 mm | 9 mm | 9 mm | 8 mm |
Tolerance nominal ⌀ | e8 | h6 | h6 | e8 | e8 | e8 | f8 | e8 |
No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |