{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 20 mm
Article no.: 202238 20
Article code:
- Tool material: Solid carbide
- Standard: Works standard
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 20 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Works standard | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 60 mm | |
| Overall length L | 126 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.085 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202238 20 | |
| EAN / GTIN | 4067263238263 | |
| Manufacturer number | 202238 20 |
Application Table
N
170
N
140
N
105
N
160
N
110
N
130
N
110
N
90
N
160
N
120
N
150
Description
Version:
Eccentric relief ground, additionally finish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Application:
For roughing and finishing.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter 20 mm
on request
In stock
44 pieces in stock
BGN 458.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
BGN 458.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
BGN 677.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Overall length L | 126 mm | 126 mm | 126 mm |
| Through-coolant | no | no | no |
| Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm |
| Flute length Lc | 60 mm | 60 mm | 60 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Type | W | W | W |