{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 5mm
Article no.: 201310 5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.03 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.04 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201310 5 | |
| EAN / GTIN | 4045197863492 | |
| Manufacturer number | 201310 5 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter, uncoated, ⌀ e8 DC: 5mm
on request
In stock
954 pieces in stock
BGN 33.07
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
344 pieces in stock
BGN 47.23
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| Cutting edge ⌀ DC | 5 mm | 5 mm |
| Helix angle | 30 degrees | 30 degrees |
| Feed fz for side milling in steel < 750 N/mm2 | 0.04 mm | 0.04 mm |
| No. of teeth Z | 2 | 2 |
| Corner chamfer width at 45° | 0.2 mm | 0.2 mm |
| Type of product | End / face mill | End / face mill |