{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter 12 mm
Article no.: 201308 12
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | AlCrN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 38 mm | |
| Recess ⌀ D1 | 11.8 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.07 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.1 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201308 12 | |
| EAN / GTIN | 4045197863409 | |
| Manufacturer number | 201308 12 |
Application Table
N
280
N
200
P
120
P
110
P
100
P
70
P
60
M
70
M
50
K
90
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter 12 mm
on request
In stock
269 pieces in stock
BGN 131.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
BGN 91.55
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling |
| Overall length L | 83 | 83 |
| Flute length Lc | 26 | 26 |
| Helix angle | 30 | 30 |
| Feed fz for side milling in steel < 750 N/mm2 | 0.1 | 0.1 |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.07 | 0.07 |
| No. of teeth Z | 2 | 2 |