{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8 25 mm
Article no.: 192450 25
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.6 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.055 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192450 25 | |
| EAN / GTIN | 4045197106339 | |
| Manufacturer number | 192450 25 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Economy version.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Economy version.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Roughing end mill HSS-Co8 25 mm
on request
In stock
75 pieces in stock
BGN 291.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
BGN 285.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
56 pieces in stock
BGN 262.04
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
137 pieces in stock
BGN 386.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
182 pieces in stock
BGN 273.28
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | uncoated | TiAlN | TiAlN |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Milling profile | NR | NF | NR | HR | NR |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Corner chamfer width at 45° | 0.6 mm | 0.5 mm | 0.6 mm | 0.3 mm | 0.5 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |