{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-Co8 6 mm
Article no.: 191590 6
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30-40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.014 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191590 6 | |
| EAN / GTIN | 4045197103710 | |
| Manufacturer number | 191590 6 |
Application Table
N
120
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Multi-flute end mill. Eccentric relief ground.
Economy version.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
End mill HSS-Co8 6 mm
on request
In stock
642 pieces in stock
BGN 33.74
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
605 pieces in stock
BGN 31.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
827 pieces in stock
BGN 39.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
302 pieces in stock
BGN 41.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
552 pieces in stock
BGN 28.01
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | without | without |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 6 | 6 | 6 | 6 | 6 |
| Flute length Lc | 13 | 13 | 13 | 24 | 13 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |