{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-Co8 4,5 mm
Article no.: 191360 4,5
Article code:
- Tool material: HSS Co 8
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 4.5 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 7 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.005 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191360 4,5 | |
| EAN / GTIN | 4045197102072 | |
| Manufacturer number | 191360 4,5 |
Application Table
N
83
P
30
P
25
P
25
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Eccentric relief ground. Shank similar to DIN 1835 B with shank tolerance h6. General-purpose cutting edge geometry. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Mini milling cutter HSS-Co8 4,5 mm
on request
Subsequent delivery
0 pieces in stock
BGN 18.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
BGN 31.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
161 pieces in stock
BGN 39.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
BGN 49.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
62 pieces in stock
BGN 20.81
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
111 pieces in stock
BGN 28.01
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | uncoated | uncoated | uncoated |
| Overall length L | 38 | 55 | 55 | 63 | 42 | 55 |
| Through-coolant | no | no | no | no | no | no |
| Shank | HB with h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | HB with h6 | DIN 1835 B to h6 |
| Flute length Lc | 7 | 11 | 11 | 19 | 11 | 11 |
| Type | N | N | N | N | N | N |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.005 | 0.007 | 0.007 | 0.005 | 0.005 | 0.008 |