{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill 7,5 mm
Article no.: 191080 7,5
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 7.5 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.016 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191080 7,5 | |
| EAN / GTIN | 4045197100115 | |
| Manufacturer number | 191080 7,5 |
Application Table
N
83
P
28
P
25
P
23
K
23
N
55
Description
Version:
Dimensions to DIN 844 long.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Slot drill 7,5 mm
on request
In stock
50 pieces in stock
BGN 59.83
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
75 pieces in stock
BGN 32.17
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
46 pieces in stock
BGN 72.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
BGN 44.32
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Through-coolant | no | no | no | no |
| Standard | DIN 844 B | DIN 327 D | DIN 327 D | DIN 327 D |
| Shank tolerance | h6 | h6 | h6 | h6 |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.016 mm | 0.016 mm | 0.016 mm | 0.016 mm |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm |