{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill HSS-PM 13 mm
Article no.: 191050 13
Article code:
- Tool material: HSS PM
- Standard: DIN 327 D
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 13 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 327 D | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 73 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.038 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191050 13 | |
| EAN / GTIN | 4045197099600 | |
| Manufacturer number | 191050 13 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Centre cutting edge geometry for plunging.
For very high demands on the metal removal rate.
For very high demands on the metal removal rate.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Slot drill HSS-PM 13 mm
on request
In stock
50 pieces in stock
BGN 137.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
BGN 61.41
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
BGN 63.66
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
87 pieces in stock
BGN 107.06
plus VAT at the current rate
Prices plus delivery costs
|
|
| Standard | DIN 327 D | DIN 327 D | DIN 327 D | DIN 844 B |
| Shank tolerance | h6 | h6 | h6 | h6 |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 |
| Type | N | N | N | N |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.038 mm | 0.038 mm | 0.038 mm | 0.036 mm |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |