{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill HSS-Co8 16 mm
Article no.: 191000 16
Article code:
- Tool material: HSS Co 8
- Standard: DIN 327 D
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 327 D | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 19 mm | |
| Overall length L | 79 mm | |
| Shank ⌀ Ds | 16 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.048 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191000 16 | |
| EAN / GTIN | 4045197099143 | |
| Manufacturer number | 191000 16 |
Application Table
N
83
N
37
P
28
P
23
P
23
K
23
N
55
Description
Version:
Centre cutting edge geometry for plunging.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Slot drill HSS-Co8 16 mm
on request
In stock
391 pieces in stock
BGN 74.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
59 pieces in stock
BGN 143.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
BGN 92.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
BGN 130.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
69 pieces in stock
BGN 141.25
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | TiAlN | TiAlN | uncoated | uncoated |
| Through-coolant | no | no | no | no | no |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Shank tolerance | h6 | h6 | h6 | h6 | h6 |
| Flute length Lc | 19 mm | 19 mm | 19 mm | 32 mm | 32 mm |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 42 degrees |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 | e8 |