{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC reamer H7, uncoated, Nominal ⌀ DC mm or inch: 17
Article no.: 162900 17
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 1835 A to h6
Product details
Technical Data
| Nominal ⌀ DC | 17 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 54 mm | |
| Overhang L1 | 128 mm | |
| Overall length L | 175 mm | |
| Number of cutting edges Z | 8 | |
| Shank ⌀ Ds | 14 mm | |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.3 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162900 17 | |
| EAN / GTIN | 4045197091000 | |
| Manufacturer number | 162900 17 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7 both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
NC reamer H7, uncoated, Nominal ⌀ DC mm or inch: 17
on request
In stock
54 pieces in stock
BGN 123.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 284.53
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
BGN 278.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
50 pieces in stock
BGN 168.24
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 282.28
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated |
| Colour ring | green | without | without | without | without |
| Overall length L | 175 mm | 175 mm | 175 mm | 214 mm | 214 mm |
| Nominal ⌀ DC | 17 mm | 17 mm | 17 mm | 17 mm | 17 mm |
| Shank | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Morse taper | Morse taper |
| Tool material | HSS E | HSS E | HSS E | HSS E | HSS E |
| Feed f in steel < 750 N/mm2 | 0.3 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. |