{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Re-adjustable hand reamer, Nominal ⌀ DC: 14mm
Article no.: 160500 14
Article code:
- Tool material: HSS
- Standard: DIN 859
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 14 mm | |
| Tool material | HSS | |
| Standard | DIN 859 | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 61 mm | |
| Overhang L1 | 97 mm | |
| Overall length L | 163 mm | |
| Shank square □ | 11.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160500 14 | |
| EAN / GTIN | 4045197250698 | |
| Manufacturer number | 160500 14 |
Application Table
N
P
P
P
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Re-adjustable hand reamer, Nominal ⌀ DC: 14mm
on request
In stock
4 pieces in stock
BGN 322.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
108 pieces in stock
BGN 208.72
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| Overall length L | 163 mm | 209 mm |
| Standard | DIN 859 | DIN 311 |
| Flute length Lc | 61 mm | 115 mm |
| Tool material | HSS | HSS |
| Helix angle | 7-8 degrees | 25 degrees |
| Type of product | Phillips bit | Phillips bit |