{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Precision countersink with unequal spacing 90°, TiAlN, External ⌀ Dc: 23mm
Article no.: 150130 23
Article code:
- Countersink tip angle: 90
- Tool material: HSS
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Product details
Technical Data
| External ⌀ | 23 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 3.8 mm | |
| Overall length L | 67 mm | |
| Shank ⌀ Ds | 10 mm | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M12 | |
| Feed f in steel < 500 N/mm2 | 0.22 mm/rev. | |
| Shank tolerance | h9 | |
| Colour ring | green | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150130 23 | |
| EAN / GTIN | 4045197741882 | |
| Manufacturer number | 150130 23 |
Application Table
N
75
N
75
N
50
P
65
P
50
P
30
P
18
P
8
H
8
M
16
M
10
S
12
K
25
N
60
N
Description
Version:
All countersinks have 3 cutting edges. Special geometry with extremely unequal spacing and matching cutting edge preparation. Radially relief ground. Flutes ground from solid. Newly developed special TiAlN coating for long service life.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Advantage:
Very smooth cutting throughout the entire countersinking operation. Chatter-free running for perfect results and optimum tool service life.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Precision countersink with unequal spacing 90°, TiAlN, External ⌀ Dc: 23mm
on request
In stock
139 pieces in stock
BGN 154.74
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
299 pieces in stock
BGN 79.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
99 pieces in stock
BGN 169.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
261 pieces in stock
BGN 57.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
213 pieces in stock
BGN 109.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
BGN 86.82
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
172 pieces in stock
BGN 167.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
BGN 111.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
BGN 105.05
plus VAT at the current rate
Prices plus delivery costs
|
|
| External ⌀ | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm | 23 mm |
| Overall length L | 67 mm | 67 mm | 67 mm | 67 mm | 67 mm | 67 mm | 67 mm | 67 mm | 67 mm |
| Countersink tip angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Shank | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Plain shank with h9 | Shank with h9 and three drive flats | Shank with h9 and three drive flats | Three clamping flats to h9 | Plain shank with h9 |
| smallest countersink ⌀ for holes from | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm | 3.8 mm |
| Feed f in steel < 500 N/mm2 | 0.22 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. | 0.22 mm/rev. | 0.16 mm/rev. | 0.16 mm/rev. |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |