{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E-PM, TiCN, M: M3
Article no.: 135760 M3
Article code:
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M3 | |
| Coating | TiCN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | C | |
| Helix angle | 15 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.5 mm | |
| Overall length L | 56 mm | |
| Shank ⌀ Ds | 3.5 mm | |
| Shank square □ | 2.7 mm | |
| Tapping hole ⌀ | 2.5 mm | |
| Thread ⌀ | 3 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | pink | |
| Number of cutting edges Z | 3 | |
| Thread depth | 6 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 135760 M3 | |
| EAN / GTIN | 4045197077530 | |
| Manufacturer number | 135760 M3 |
Application Table
P
23
P
13
P
7
S
5
Description
Version:
Sturdy design, with 15° right-hand chip flutes.
For use with emulsion (fat content minimum 8%).
For use with emulsion (fat content minimum 8%).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine tap HSS-E-PM, TiCN, M: M3
on request
In stock
44 pieces in stock
BGN 115.61
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
BGN 38.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
BGN 67.92
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
BGN 89.30
plus VAT at the current rate
Prices plus delivery costs
|
|
| Type of threading tool | Machine tap for dynamic machining | Machine tap for dynamic machining | Maskinsnittapper til dynamisk bearbejdning | Machine tap for dynamic machining |
| Coating | TiCN | nitrided | TiCN | nitrided |
| Overall length L | 56 mm | 56 mm | 56 mm | 56 mm |
| Tapping hole ⌀ | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm |
| Standard | DIN 371 | DIN 371 | DIN 371 | DIN 371 |
| Tool material | HSS E PM | HSS E | HSS E | HSS E PM |
| Application for type of drilling | up to 2×D for blind holes | up to 3×D for blind holes; up to 3×D for through holes | up to 3×D for blind holes; up to 3×D for through holes | up to 2×D for blind holes |