{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC drill Weldon shank DIN 6535 HB, TiAlSiN, ⌀ DC m7: 12mm
Article no.: 122681 12
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 12 mm | |
| Coating | TiAlSiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 53 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 71 mm | |
| Overall length L | 118 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed f in titanium > 850 N/mm2 | 0.15 mm/rev. | |
| Colour ring | pink | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122681 12 | |
| EAN / GTIN | 4062406792275 | |
| Manufacturer number | 122681 12 |
Application Table
S
45
S
35
Description
Version:
Specially for machining titanium-based and nickel-based alloys. With wear-resistant, ultra-smooth TiAlSiN high-performance coating for a long tool life combined with optimum bore quality and very low burr formation.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide HPC drill Weldon shank DIN 6535 HB, TiAlSiN, ⌀ DC m7: 12mm
on request
In stock
10 pieces in stock
BGN 322.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
BGN 201.08
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | pink | blue |
| Overall length L | 118 mm | 118 mm |
| Through-coolant | yes, with 25 bar | yes, with 25 bar |
| Standard | DIN 6537 | DIN 6537 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Point angle | 140 degrees | 140 degrees |
| recommended maximum drilling depth L2 | 53 mm | 53 mm |